Computer Science Standards
Remove this criterion from the search
Recognizing and Defining Computational Problems
Remove this criterion from the search
Creating Computational Artifacts
Remove this criterion from the search
Testing and Refining Computational Artifacts
Remove this criterion from the search
Communicating About Computing
Results
Showing 11 - 20 of 57 Standards
Standard Identifier: 3-5.AP.12
Grade Range:
3–5
Concept:
Algorithms & Programming
Subconcept:
Control
Practice(s):
Creating Computational Artifacts (5.2)
Standard:
Create programs that include events, loops, and conditionals.
Descriptive Statement:
Control structures specify the order (sequence) in which instructions are executed within a program and can be combined to support the creation of more complex programs. Events allow portions of a program to run based on a specific action. Conditionals allow for the execution of a portion of code in a program when a certain condition is true. Loops allow for the repetition of a sequence of code multiple times. For example, students could program an interactive map of the United States of America. They could use events to initiate a question when the user clicks on a state and conditionals to check whether the user input is correct. They could use loops to repeat the question until the user answers correctly or to control the length of a "congratulations" scenario that plays after a correct answer. (HSS.5.9) Alternatively, students could write a math fluency game that asks products of two one-digit numbers and then uses a conditional to check whether or not the answer that was entered is correct. They could use a loop to repeatedly ask another question. They could use events to allow the user to click on a green button to play again or a red button to end the game. (CA CCSS for Mathematics 3.OA.7) Additionally, students could create a program as a role-playing game based on a literary work. Loops could be used to animate a character's movement. When reaching a decision point in the story, an event could initiate the user to type a response. A conditional could change the setting or have the story play out differently based on the user input. (CA CCSS for ELA/Literacy RL.5.3)
Create programs that include events, loops, and conditionals.
Descriptive Statement:
Control structures specify the order (sequence) in which instructions are executed within a program and can be combined to support the creation of more complex programs. Events allow portions of a program to run based on a specific action. Conditionals allow for the execution of a portion of code in a program when a certain condition is true. Loops allow for the repetition of a sequence of code multiple times. For example, students could program an interactive map of the United States of America. They could use events to initiate a question when the user clicks on a state and conditionals to check whether the user input is correct. They could use loops to repeat the question until the user answers correctly or to control the length of a "congratulations" scenario that plays after a correct answer. (HSS.5.9) Alternatively, students could write a math fluency game that asks products of two one-digit numbers and then uses a conditional to check whether or not the answer that was entered is correct. They could use a loop to repeatedly ask another question. They could use events to allow the user to click on a green button to play again or a red button to end the game. (CA CCSS for Mathematics 3.OA.7) Additionally, students could create a program as a role-playing game based on a literary work. Loops could be used to animate a character's movement. When reaching a decision point in the story, an event could initiate the user to type a response. A conditional could change the setting or have the story play out differently based on the user input. (CA CCSS for ELA/Literacy RL.5.3)
Standard Identifier: 3-5.AP.13
Grade Range:
3–5
Concept:
Algorithms & Programming
Subconcept:
Modularity
Practice(s):
Recognizing and Defining Computational Problems (3.2)
Standard:
Decompose problems into smaller, manageable tasks which may themselves be decomposed.
Descriptive Statement:
Decomposition is the act of breaking down tasks into simpler tasks. This manages complexity in the problem solving and program development process. For example, students could create an animation to represent a story they have written. Students write a story and then break it down into different scenes. For each scene, they would select a background, place characters, and program actions in that scene. (CA CCSS for ELA/Literacy W.3.3, W.4.3, W.5.3) Alternatively, students could create a program to allow classmates to present data collected in an experiment. For example, if students collected rain gauge data once per week for 3 months, students could break down the program tasks: 1) ask the user to input 12 weeks' worth of data, 2) process the data (e.g., add the first four entries to calculate the rain amount for month 1, convert to metric system measurements), and 3) direct the creation or resizing of objects (e.g., one rectangular chart bar for each month) to represent the total number of rainfall for that month. (CA NGSS: 3-ETS-1-2) (CA CCSS for Mathematics 3.MD.2)
Decompose problems into smaller, manageable tasks which may themselves be decomposed.
Descriptive Statement:
Decomposition is the act of breaking down tasks into simpler tasks. This manages complexity in the problem solving and program development process. For example, students could create an animation to represent a story they have written. Students write a story and then break it down into different scenes. For each scene, they would select a background, place characters, and program actions in that scene. (CA CCSS for ELA/Literacy W.3.3, W.4.3, W.5.3) Alternatively, students could create a program to allow classmates to present data collected in an experiment. For example, if students collected rain gauge data once per week for 3 months, students could break down the program tasks: 1) ask the user to input 12 weeks' worth of data, 2) process the data (e.g., add the first four entries to calculate the rain amount for month 1, convert to metric system measurements), and 3) direct the creation or resizing of objects (e.g., one rectangular chart bar for each month) to represent the total number of rainfall for that month. (CA NGSS: 3-ETS-1-2) (CA CCSS for Mathematics 3.MD.2)
Standard Identifier: 3-5.AP.14
Grade Range:
3–5
Concept:
Algorithms & Programming
Subconcept:
Modularity
Practice(s):
Developing and Using Abstractions, Creating Computational Artifacts (4.2, 5.3)
Standard:
Create programs by incorporating smaller portions of existing programs, to develop something new or add more advanced features.
Descriptive Statement:
Programs can be broken down into smaller parts, which can be incorporated into new or existing programs. Students incorporate predefined functions into their original designs. At this level, students do not need to understand all of the underlying implementation details of the abstractions that they use. For example, students could use code from a ping pong animation to make a ball bounce in a new basketball game. They could also incorporate code from a single-player basketball game to create a two-player game with slightly different rules. Alternatively, students could remix an animated story and add their own conclusion and/or additional dialogue. (CA CCSS for ELA/Literacy W.3.3.B, W.3.3.D, W.4.3.B, W.4.3.E, W.5.3.B, W.5.3.E) Additionally, when creating a game that occurs on the moon or planets, students could incorporate and modify code that simulates gravity on Earth. They could modify the strength of the gravitational force based on the mass of the planet or moon. (CA NGSS: 5-PS2-1)
Create programs by incorporating smaller portions of existing programs, to develop something new or add more advanced features.
Descriptive Statement:
Programs can be broken down into smaller parts, which can be incorporated into new or existing programs. Students incorporate predefined functions into their original designs. At this level, students do not need to understand all of the underlying implementation details of the abstractions that they use. For example, students could use code from a ping pong animation to make a ball bounce in a new basketball game. They could also incorporate code from a single-player basketball game to create a two-player game with slightly different rules. Alternatively, students could remix an animated story and add their own conclusion and/or additional dialogue. (CA CCSS for ELA/Literacy W.3.3.B, W.3.3.D, W.4.3.B, W.4.3.E, W.5.3.B, W.5.3.E) Additionally, when creating a game that occurs on the moon or planets, students could incorporate and modify code that simulates gravity on Earth. They could modify the strength of the gravitational force based on the mass of the planet or moon. (CA NGSS: 5-PS2-1)
Standard Identifier: 3-5.AP.15
Grade Range:
3–5
Concept:
Algorithms & Programming
Subconcept:
Program Development
Practice(s):
Fostering an Inclusive Computing Culture, Creating Computational Artifacts (1.1, 5.1)
Standard:
Use an iterative process to plan and develop a program by considering the perspectives and preferences of others.
Descriptive Statement:
Planning is an important part of the iterative process of program development. Students gain a basic understanding of the importance and process of planning before beginning to write code for a program. They plan the development of a program by outlining key features, time and resource constraints, and user expectations. Students should document the plan as, for example, a storyboard, flowchart, pseudocode, or story map. For example, students could collaborate with a partner to plan and develop a program that graphs a function. They could iteratively modify the program based on feedback from diverse users, such as students who are color blind and may have trouble differentiating lines on a graph based on the color. (CA CCSS for Mathematics 5.G.1, 5.G.2) Alternatively, students could plan as a team to develop a program to display experimental data. They could implement the program in stages, generating basic displays first and then soliciting feedback from others on how easy it is to interpret (e.g., are labels clear and readable?, are lines thick enough?, are titles understandable?). Students could iteratively improve their display to make it more readable and to better support the communication of the finding of the experiment. (NGSS.3-5-ETS1-1, 3-5-ETS1-2, 3-5-ETS1-3)
Use an iterative process to plan and develop a program by considering the perspectives and preferences of others.
Descriptive Statement:
Planning is an important part of the iterative process of program development. Students gain a basic understanding of the importance and process of planning before beginning to write code for a program. They plan the development of a program by outlining key features, time and resource constraints, and user expectations. Students should document the plan as, for example, a storyboard, flowchart, pseudocode, or story map. For example, students could collaborate with a partner to plan and develop a program that graphs a function. They could iteratively modify the program based on feedback from diverse users, such as students who are color blind and may have trouble differentiating lines on a graph based on the color. (CA CCSS for Mathematics 5.G.1, 5.G.2) Alternatively, students could plan as a team to develop a program to display experimental data. They could implement the program in stages, generating basic displays first and then soliciting feedback from others on how easy it is to interpret (e.g., are labels clear and readable?, are lines thick enough?, are titles understandable?). Students could iteratively improve their display to make it more readable and to better support the communication of the finding of the experiment. (NGSS.3-5-ETS1-1, 3-5-ETS1-2, 3-5-ETS1-3)
Standard Identifier: 3-5.AP.16
Grade Range:
3–5
Concept:
Algorithms & Programming
Subconcept:
Program Development
Practice(s):
Creating Computational Artifacts, Communicating About Computing (5.2, 7.3)
Standard:
Observe intellectual property rights and give appropriate attribution when creating, remixing, or combining programs.
Descriptive Statement:
Intellectual property rights can vary by country, but copyright laws give the creator of a work a set of rights and prevents others from copying the work and using it in ways that they may not like. Students consider common licenses that place limitations or restrictions on the use of others' work, such as images and music downloaded from the Internet. When incorporating the work of others, students attribute the work. At this level, students could give attribution by including credits or links directly in their programs, code comments, or separate project pages. For example, when making a program to model the life cycle of a butterfly, students could modify and reuse an existing program that describes the life cycle of a frog. Based on their research, students could identify and use Creative Commons-licensed or public domain images and sounds of caterpillars and butterflies. Students give attribution by properly citing the source of the original piece as necessary. (CA NGSS: 3-LS-1-1) (CA CCSS for ELA/Literacy W.3.8, W.4.8, W.5.8) Alternatively, when creating a program explaining the structure of the United States goverment, students find Creative Commons-licensed or public domain images to represent the three branches of government and attribute ownership of the images appropriately. If students find and incorporate an audio file of a group playing part of the national anthem, they appropriately give attribution on the project page. (HSS.3.4.4)
Observe intellectual property rights and give appropriate attribution when creating, remixing, or combining programs.
Descriptive Statement:
Intellectual property rights can vary by country, but copyright laws give the creator of a work a set of rights and prevents others from copying the work and using it in ways that they may not like. Students consider common licenses that place limitations or restrictions on the use of others' work, such as images and music downloaded from the Internet. When incorporating the work of others, students attribute the work. At this level, students could give attribution by including credits or links directly in their programs, code comments, or separate project pages. For example, when making a program to model the life cycle of a butterfly, students could modify and reuse an existing program that describes the life cycle of a frog. Based on their research, students could identify and use Creative Commons-licensed or public domain images and sounds of caterpillars and butterflies. Students give attribution by properly citing the source of the original piece as necessary. (CA NGSS: 3-LS-1-1) (CA CCSS for ELA/Literacy W.3.8, W.4.8, W.5.8) Alternatively, when creating a program explaining the structure of the United States goverment, students find Creative Commons-licensed or public domain images to represent the three branches of government and attribute ownership of the images appropriately. If students find and incorporate an audio file of a group playing part of the national anthem, they appropriately give attribution on the project page. (HSS.3.4.4)
Standard Identifier: 3-5.AP.17
Grade Range:
3–5
Concept:
Algorithms & Programming
Subconcept:
Program Development
Practice(s):
Testing and Refining Computational Artifacts (6.2)
Standard:
Test and debug a program or algorithm to ensure it accomplishes the intended task.
Descriptive Statement:
Programs do not always run properly. Students need to understand how to test and make necessary corrections to their programs to ensure they run properly. Students successfully identify and fix errors in (debug) their programs and programs created by others. Debugging strategies at this level may include testing to determine the first place the solution is in error and fixing accordingly, leaving "breadcrumbs" in a program, and soliciting assistance from peers and online resources. For example, when students are developing a program to control the movement of a robot in a confined space, students test various inputs that control movement of the robot to make sure it behaves as intended (e.g., if an input would cause the robot to move past a wall of the confined space, it should not move at all). (CA NGSS: 3-5-ETS1-3) Additionally, students could test and debug an algorithm by tracing the inputs and outputs on a whiteboard. When noticing "bugs" (errors), students could identify what was supposed to happen and step through the algorithm to locate and then correct the error.
Test and debug a program or algorithm to ensure it accomplishes the intended task.
Descriptive Statement:
Programs do not always run properly. Students need to understand how to test and make necessary corrections to their programs to ensure they run properly. Students successfully identify and fix errors in (debug) their programs and programs created by others. Debugging strategies at this level may include testing to determine the first place the solution is in error and fixing accordingly, leaving "breadcrumbs" in a program, and soliciting assistance from peers and online resources. For example, when students are developing a program to control the movement of a robot in a confined space, students test various inputs that control movement of the robot to make sure it behaves as intended (e.g., if an input would cause the robot to move past a wall of the confined space, it should not move at all). (CA NGSS: 3-5-ETS1-3) Additionally, students could test and debug an algorithm by tracing the inputs and outputs on a whiteboard. When noticing "bugs" (errors), students could identify what was supposed to happen and step through the algorithm to locate and then correct the error.
Standard Identifier: 3-5.AP.19
Grade Range:
3–5
Concept:
Algorithms & Programming
Subconcept:
Program Development
Practice(s):
Communicating About Computing (7.2)
Standard:
Describe choices made during program development using code comments, presentations, and demonstrations.
Descriptive Statement:
People communicate about their code to help others understand and use their programs. Explaining one's design choices gives others a better understanding of one's work. Students may explain their step-by-step process of creating a program in a presentation or demonstration of their personal code journals. They describe how comments within code organize thought and process during the develpment of the program. For example, students could describe the decision to have the score in a game flash when it can be rounded to 100 by writing a comment in the code. (CA CCSS for Mathematics 3.NBT.1) Alternatively, students could present their overall program development experience and justify choices made by using storyboards, annotated images, videos, and/or journal entries. (CA CCSS for ELA/Literacy SL.3.4, SL.4.4, SL.5.4, SL.3.5, SL.4.5, SL.5.5) (CA NGSS: 3-5-ETS1-1, 3.5-ETS1-2, 3.5-ETS1-3)
Describe choices made during program development using code comments, presentations, and demonstrations.
Descriptive Statement:
People communicate about their code to help others understand and use their programs. Explaining one's design choices gives others a better understanding of one's work. Students may explain their step-by-step process of creating a program in a presentation or demonstration of their personal code journals. They describe how comments within code organize thought and process during the develpment of the program. For example, students could describe the decision to have the score in a game flash when it can be rounded to 100 by writing a comment in the code. (CA CCSS for Mathematics 3.NBT.1) Alternatively, students could present their overall program development experience and justify choices made by using storyboards, annotated images, videos, and/or journal entries. (CA CCSS for ELA/Literacy SL.3.4, SL.4.4, SL.5.4, SL.3.5, SL.4.5, SL.5.5) (CA NGSS: 3-5-ETS1-1, 3.5-ETS1-2, 3.5-ETS1-3)
Standard Identifier: 3-5.NI.5
Grade Range:
3–5
Concept:
Networks & the Internet
Subconcept:
Cybersecurity
Practice(s):
Recognizing and Defining Computational Problems (3.1)
Standard:
Describe physical and digital security measures for protecting personal information.
Descriptive Statement:
Personal information can be protected physically and digitally. Cybersecurity is the protection from unauthorized use of electronic data, or the measures taken to achieve this. Students identify what personal information is and the reasons for protecting it. Students describe physical and digital approaches for protecting personal information such as using strong passwords and biometric scanners. For example, students could engage in a collaborative discussion orally or in writing regarding topics that relate to personal cybersecurity issues. Discussion topics could be based on current events related to cybersecurity or topics that are applicable to students, such as the necessity of backing up data to guard against loss, how to create strong passwords and the importance of not sharing passwords, or why we should keep operating systems updated and use anti-virus software to protect data and systems. Students could also discuss physical measures that can be used to protect data including biometric scanners, locked doors, and physical backups. (CA CCSS for ELA/Literacy SL.3.1, SL.4.1, SL.5.1)
Describe physical and digital security measures for protecting personal information.
Descriptive Statement:
Personal information can be protected physically and digitally. Cybersecurity is the protection from unauthorized use of electronic data, or the measures taken to achieve this. Students identify what personal information is and the reasons for protecting it. Students describe physical and digital approaches for protecting personal information such as using strong passwords and biometric scanners. For example, students could engage in a collaborative discussion orally or in writing regarding topics that relate to personal cybersecurity issues. Discussion topics could be based on current events related to cybersecurity or topics that are applicable to students, such as the necessity of backing up data to guard against loss, how to create strong passwords and the importance of not sharing passwords, or why we should keep operating systems updated and use anti-virus software to protect data and systems. Students could also discuss physical measures that can be used to protect data including biometric scanners, locked doors, and physical backups. (CA CCSS for ELA/Literacy SL.3.1, SL.4.1, SL.5.1)
Standard Identifier: 6-8.AP.11
Grade Range:
6–8
Concept:
Algorithms & Programming
Subconcept:
Variables
Practice(s):
Creating Computational Artifacts (5.1, 5.2)
Standard:
Create clearly named variables that store data, and perform operations on their contents.
Descriptive Statement:
A variable is a container for data, and the name used for accessing the variable is called the identifier. Students declare, initialize, and update variables for storing different types of program data (e.g., text, integers) using names and naming conventions (e.g. camel case) that clearly convey the purpose of the variable, facilitate debugging, and improve readability. For example, students could program a quiz game with a score variable (e.g. quizScore) that is initially set to zero and increases by increments of one each time the user answers a quiz question correctly and decreases by increments of one each time a user answers a quiz question incorrectly, resulting in a score that is either a positive or negative integer. (CA CCSS for Mathematics 6.NS.5) Alternatively, students could write a program that prompts the user for their name, stores the user's response in a variable (e.g. userName), and uses this variable to greet the user by name.
Create clearly named variables that store data, and perform operations on their contents.
Descriptive Statement:
A variable is a container for data, and the name used for accessing the variable is called the identifier. Students declare, initialize, and update variables for storing different types of program data (e.g., text, integers) using names and naming conventions (e.g. camel case) that clearly convey the purpose of the variable, facilitate debugging, and improve readability. For example, students could program a quiz game with a score variable (e.g. quizScore) that is initially set to zero and increases by increments of one each time the user answers a quiz question correctly and decreases by increments of one each time a user answers a quiz question incorrectly, resulting in a score that is either a positive or negative integer. (CA CCSS for Mathematics 6.NS.5) Alternatively, students could write a program that prompts the user for their name, stores the user's response in a variable (e.g. userName), and uses this variable to greet the user by name.
Standard Identifier: 6-8.AP.12
Grade Range:
6–8
Concept:
Algorithms & Programming
Subconcept:
Control
Practice(s):
Creating Computational Artifacts (5.1, 5.2)
Standard:
Design and iteratively develop programs that combine control structures and use compound conditions.
Descriptive Statement:
Control structures can be combined in many ways. Nested loops are loops placed within loops, and nested conditionals allow the result of one conditional to lead to another. Compound conditions combine two or more conditions in a logical relationship (e.g., using AND, OR, and NOT). Students appropriately use control structures to perform repetitive and selection tasks. For example, when programming an interactive story, students could use a compound conditional within a loop to unlock a door only if a character has a key AND is touching the door. (CA CCSS for ELA/Literacy W.6.3, W.7.3, W.8.3) Alternatively, students could use compound conditionals when writing a program to test whether two points lie along the line defined by a particular linear function. (CA CCSS for Mathematics 8.EE.7) Additionally, students could use nested loops to program a character to do the "chicken dance" by opening and closing the beak, flapping the wings, shaking the hips, and clapping four times each; this dance "chorus" is then repeated several times in its entirety.
Design and iteratively develop programs that combine control structures and use compound conditions.
Descriptive Statement:
Control structures can be combined in many ways. Nested loops are loops placed within loops, and nested conditionals allow the result of one conditional to lead to another. Compound conditions combine two or more conditions in a logical relationship (e.g., using AND, OR, and NOT). Students appropriately use control structures to perform repetitive and selection tasks. For example, when programming an interactive story, students could use a compound conditional within a loop to unlock a door only if a character has a key AND is touching the door. (CA CCSS for ELA/Literacy W.6.3, W.7.3, W.8.3) Alternatively, students could use compound conditionals when writing a program to test whether two points lie along the line defined by a particular linear function. (CA CCSS for Mathematics 8.EE.7) Additionally, students could use nested loops to program a character to do the "chicken dance" by opening and closing the beak, flapping the wings, shaking the hips, and clapping four times each; this dance "chorus" is then repeated several times in its entirety.
Showing 11 - 20 of 57 Standards
Questions: Curriculum Frameworks and Instructional Resources Division |
CFIRD@cde.ca.gov | 916-319-0881