Computer Science Standards
Results
Showing 1 - 10 of 15 Standards
Standard Identifier: K-2.AP.12
Grade Range:
K–2
Concept:
Algorithms & Programming
Subconcept:
Control
Practice(s):
Creating Computational Artifacts (5.2)
Standard:
Create programs with sequences of commands and simple loops, to express ideas or address a problem.
Descriptive Statement:
People create programs by composing sequences of commands that specify the precise order in which instructions should be executed. Loops enable programs to repeat a sequence of commands multiple times. For example, students could follow simple movements in response to oral instructions. Students could then create a simple sequence of movement commands in response to a given problem (e.g., In how many ways can you travel from point A to point B?) and represent it as a computer program, using loops to repeat commands. (VAPA Dance K.1.4, 1.2.3, 1.2.5, 1.2.8, 2.2.1, 2.2.2, 2.2.3) Alternatively, on a mat with many different CVC words, students could program robots to move to words with a similar vowel sound. Students could look for multiple ways to solve the problem and simplify their solution by incorporating loops. (CA CCSS for ELA/Literacy RF.K.2.D, RF.1.2.C)
Create programs with sequences of commands and simple loops, to express ideas or address a problem.
Descriptive Statement:
People create programs by composing sequences of commands that specify the precise order in which instructions should be executed. Loops enable programs to repeat a sequence of commands multiple times. For example, students could follow simple movements in response to oral instructions. Students could then create a simple sequence of movement commands in response to a given problem (e.g., In how many ways can you travel from point A to point B?) and represent it as a computer program, using loops to repeat commands. (VAPA Dance K.1.4, 1.2.3, 1.2.5, 1.2.8, 2.2.1, 2.2.2, 2.2.3) Alternatively, on a mat with many different CVC words, students could program robots to move to words with a similar vowel sound. Students could look for multiple ways to solve the problem and simplify their solution by incorporating loops. (CA CCSS for ELA/Literacy RF.K.2.D, RF.1.2.C)
Standard Identifier: K-2.DA.9
Grade Range:
K–2
Concept:
Data & Analysis
Subconcept:
Inference & Models
Practice(s):
Developing and Using Abstractions (4.1)
Standard:
Identify and describe patterns in data visualizations, such as charts or graphs, to make predictions.
Descriptive Statement:
Data can be used to make inferences or predictions about the world. For example, students could record the number of each color of candy in a small packet. Then, they compare their individual data with classmates. Students could use the collected data to predict how many of each colored candy will be in a full size bag of like candy. (CA CCSS for Mathematics K.MD.3, 1.MD.4, 2.MD.10) Alternatively, students could sort and classify objects according to their properties and note observations. Students could then create a graph or chart of their observations and look for connections/relationships (e.g., items that are hard are usually also smooth, or items that are fluffy are usually also light in weight.) Students then look at pictures of additional objects and make predictions regarding the properties of the objects pictured. (CA NGSS: 2-PS1-1, 2-PS1-2)
Identify and describe patterns in data visualizations, such as charts or graphs, to make predictions.
Descriptive Statement:
Data can be used to make inferences or predictions about the world. For example, students could record the number of each color of candy in a small packet. Then, they compare their individual data with classmates. Students could use the collected data to predict how many of each colored candy will be in a full size bag of like candy. (CA CCSS for Mathematics K.MD.3, 1.MD.4, 2.MD.10) Alternatively, students could sort and classify objects according to their properties and note observations. Students could then create a graph or chart of their observations and look for connections/relationships (e.g., items that are hard are usually also smooth, or items that are fluffy are usually also light in weight.) Students then look at pictures of additional objects and make predictions regarding the properties of the objects pictured. (CA NGSS: 2-PS1-1, 2-PS1-2)
Standard Identifier: K-2.IC.19
Grade Range:
K–2
Concept:
Impacts of Computing
Subconcept:
Social Interactions
Practice(s):
Collaborating Around Computing (2.1)
Standard:
Work respectfully and responsibly with others when communicating electronically.
Descriptive Statement:
Electronic communication facilitates positive interactions, such as sharing ideas with many people, but the public and anonymous nature of electronic communication also allows intimidating and inappropriate behavior in the form of cyberbullying. Responsible electronic communication includes limiting access to personably identifiable information. Students learn and use appropriate behavior when communicating electronically (often called "netiquette"). For example, students could share their work on a classroom blog or in other collaborative spaces online, taking care to avoid sharing information that is inappropriate or that could personally identify themselves to others. (CA CCSS for ELA/Literacy W.K.6, W.1.6, W.21.6) Alternatively, students could provide feedback to others on their work in a kind and respectful manner. They could learn how written words can be easily misinterpreted and may seem negative when the intention may be to express confusion, give ideas, or prompt further discussion. They could also learn to identify harmful behavior on collaborative spaces and intervening to find the proper authority to help. (CA CCSS for ELA/Literacy W.K.5, W.1.5, W.2.5) (HSS 1.1.2)
Work respectfully and responsibly with others when communicating electronically.
Descriptive Statement:
Electronic communication facilitates positive interactions, such as sharing ideas with many people, but the public and anonymous nature of electronic communication also allows intimidating and inappropriate behavior in the form of cyberbullying. Responsible electronic communication includes limiting access to personably identifiable information. Students learn and use appropriate behavior when communicating electronically (often called "netiquette"). For example, students could share their work on a classroom blog or in other collaborative spaces online, taking care to avoid sharing information that is inappropriate or that could personally identify themselves to others. (CA CCSS for ELA/Literacy W.K.6, W.1.6, W.21.6) Alternatively, students could provide feedback to others on their work in a kind and respectful manner. They could learn how written words can be easily misinterpreted and may seem negative when the intention may be to express confusion, give ideas, or prompt further discussion. They could also learn to identify harmful behavior on collaborative spaces and intervening to find the proper authority to help. (CA CCSS for ELA/Literacy W.K.5, W.1.5, W.2.5) (HSS 1.1.2)
Standard Identifier: 3-5.AP.12
Grade Range:
3–5
Concept:
Algorithms & Programming
Subconcept:
Control
Practice(s):
Creating Computational Artifacts (5.2)
Standard:
Create programs that include events, loops, and conditionals.
Descriptive Statement:
Control structures specify the order (sequence) in which instructions are executed within a program and can be combined to support the creation of more complex programs. Events allow portions of a program to run based on a specific action. Conditionals allow for the execution of a portion of code in a program when a certain condition is true. Loops allow for the repetition of a sequence of code multiple times. For example, students could program an interactive map of the United States of America. They could use events to initiate a question when the user clicks on a state and conditionals to check whether the user input is correct. They could use loops to repeat the question until the user answers correctly or to control the length of a "congratulations" scenario that plays after a correct answer. (HSS.5.9) Alternatively, students could write a math fluency game that asks products of two one-digit numbers and then uses a conditional to check whether or not the answer that was entered is correct. They could use a loop to repeatedly ask another question. They could use events to allow the user to click on a green button to play again or a red button to end the game. (CA CCSS for Mathematics 3.OA.7) Additionally, students could create a program as a role-playing game based on a literary work. Loops could be used to animate a character's movement. When reaching a decision point in the story, an event could initiate the user to type a response. A conditional could change the setting or have the story play out differently based on the user input. (CA CCSS for ELA/Literacy RL.5.3)
Create programs that include events, loops, and conditionals.
Descriptive Statement:
Control structures specify the order (sequence) in which instructions are executed within a program and can be combined to support the creation of more complex programs. Events allow portions of a program to run based on a specific action. Conditionals allow for the execution of a portion of code in a program when a certain condition is true. Loops allow for the repetition of a sequence of code multiple times. For example, students could program an interactive map of the United States of America. They could use events to initiate a question when the user clicks on a state and conditionals to check whether the user input is correct. They could use loops to repeat the question until the user answers correctly or to control the length of a "congratulations" scenario that plays after a correct answer. (HSS.5.9) Alternatively, students could write a math fluency game that asks products of two one-digit numbers and then uses a conditional to check whether or not the answer that was entered is correct. They could use a loop to repeatedly ask another question. They could use events to allow the user to click on a green button to play again or a red button to end the game. (CA CCSS for Mathematics 3.OA.7) Additionally, students could create a program as a role-playing game based on a literary work. Loops could be used to animate a character's movement. When reaching a decision point in the story, an event could initiate the user to type a response. A conditional could change the setting or have the story play out differently based on the user input. (CA CCSS for ELA/Literacy RL.5.3)
Standard Identifier: 3-5.DA.9
Grade Range:
3–5
Concept:
Data & Analysis
Subconcept:
Inference & Models
Practice(s):
Communicating About Computing (7.1)
Standard:
Use data to highlight and/or propose relationships, predict outcomes, or communicate ideas.
Descriptive Statement:
The accuracy of data analysis is related to how the data is represented. Inferences or predictions based on data are less likely to be accurate if the data is insufficient, incomplete, or inaccurate or if the data is incorrect in some way. Additionally, people select aspects and subsets of data to be transformed, organized, and categorized. Students should be able to refer to data when communicating an idea, in order to highlight and/or propose relationships, predict outcomes, highlight different views and/or communicate insights and ideas. For example, students can be provided a scenario in which they are city managers who have a specific amount of funds to improve a city in California. Students can collect data of a city concerning land use, vegetation, wildlife, climate, population density, services and transportation (HSS.4.1.5) to determine and present what area needs to be focused on to improve a problem. Students can compare their data and planned use of funds with peers, clearly communicating or predict outcomes based on data collected. (CA CCCS for ELA/Literacy SL.3.1, SL.4.1, SL.5.1) Alternatively, students could record the temperature at noon each day to show that temperatures are higher in certain months of the year. If temperatures are not recorded on non-school days or are recorded incorrectly, the data would be incomplete and ideas being communicated could be inaccurate. Students may also record the day of the week on which the data was collected, but this would have no relevance to whether temperatures are higher or lower. In order to have sufficient and accurate data on which to communicate the idea, students might use data provided by a governmental weather agency. (CA NGSS: 3-ESS2-1)
Use data to highlight and/or propose relationships, predict outcomes, or communicate ideas.
Descriptive Statement:
The accuracy of data analysis is related to how the data is represented. Inferences or predictions based on data are less likely to be accurate if the data is insufficient, incomplete, or inaccurate or if the data is incorrect in some way. Additionally, people select aspects and subsets of data to be transformed, organized, and categorized. Students should be able to refer to data when communicating an idea, in order to highlight and/or propose relationships, predict outcomes, highlight different views and/or communicate insights and ideas. For example, students can be provided a scenario in which they are city managers who have a specific amount of funds to improve a city in California. Students can collect data of a city concerning land use, vegetation, wildlife, climate, population density, services and transportation (HSS.4.1.5) to determine and present what area needs to be focused on to improve a problem. Students can compare their data and planned use of funds with peers, clearly communicating or predict outcomes based on data collected. (CA CCCS for ELA/Literacy SL.3.1, SL.4.1, SL.5.1) Alternatively, students could record the temperature at noon each day to show that temperatures are higher in certain months of the year. If temperatures are not recorded on non-school days or are recorded incorrectly, the data would be incomplete and ideas being communicated could be inaccurate. Students may also record the day of the week on which the data was collected, but this would have no relevance to whether temperatures are higher or lower. In order to have sufficient and accurate data on which to communicate the idea, students might use data provided by a governmental weather agency. (CA NGSS: 3-ESS2-1)
Standard Identifier: 3-5.IC.22
Grade Range:
3–5
Concept:
Impacts of Computing
Subconcept:
Social Interactions
Practice(s):
Fostering an Inclusive Computing Culture (1.1)
Standard:
Seek and explain the impact of diverse perspectives for the purpose of improving computational artifacts.
Descriptive Statement:
Computing technologies enable global collaboration and sharing of ideas. Students solicit feedback from a diverse group of users and creators and explain how this input improves their computational artifacts. For example, students could seek feedback from classmates via user surveys, in order to create an idea and then make a claim as to how to improve the overall structure and function of their computational artifact. Using the feedback students could write an opinion piece supporting their claim. (CA CCSS for ELA/Literacy W.3.1, W.4.1, W.5.1) Alternatively, with guidance from their teacher, students could use video conferencing tools, shared documents, or other online collaborative spaces, such as blogs, wikis, forums, or website comments, to gather and synthesize feedback from individuals and groups about programming projects. (CA CCSS for ELA/Literacy SL.3.1, SL.4.1, SL.5.1)
Seek and explain the impact of diverse perspectives for the purpose of improving computational artifacts.
Descriptive Statement:
Computing technologies enable global collaboration and sharing of ideas. Students solicit feedback from a diverse group of users and creators and explain how this input improves their computational artifacts. For example, students could seek feedback from classmates via user surveys, in order to create an idea and then make a claim as to how to improve the overall structure and function of their computational artifact. Using the feedback students could write an opinion piece supporting their claim. (CA CCSS for ELA/Literacy W.3.1, W.4.1, W.5.1) Alternatively, with guidance from their teacher, students could use video conferencing tools, shared documents, or other online collaborative spaces, such as blogs, wikis, forums, or website comments, to gather and synthesize feedback from individuals and groups about programming projects. (CA CCSS for ELA/Literacy SL.3.1, SL.4.1, SL.5.1)
Standard Identifier: 6-8.AP.12
Grade Range:
6–8
Concept:
Algorithms & Programming
Subconcept:
Control
Practice(s):
Creating Computational Artifacts (5.1, 5.2)
Standard:
Design and iteratively develop programs that combine control structures and use compound conditions.
Descriptive Statement:
Control structures can be combined in many ways. Nested loops are loops placed within loops, and nested conditionals allow the result of one conditional to lead to another. Compound conditions combine two or more conditions in a logical relationship (e.g., using AND, OR, and NOT). Students appropriately use control structures to perform repetitive and selection tasks. For example, when programming an interactive story, students could use a compound conditional within a loop to unlock a door only if a character has a key AND is touching the door. (CA CCSS for ELA/Literacy W.6.3, W.7.3, W.8.3) Alternatively, students could use compound conditionals when writing a program to test whether two points lie along the line defined by a particular linear function. (CA CCSS for Mathematics 8.EE.7) Additionally, students could use nested loops to program a character to do the "chicken dance" by opening and closing the beak, flapping the wings, shaking the hips, and clapping four times each; this dance "chorus" is then repeated several times in its entirety.
Design and iteratively develop programs that combine control structures and use compound conditions.
Descriptive Statement:
Control structures can be combined in many ways. Nested loops are loops placed within loops, and nested conditionals allow the result of one conditional to lead to another. Compound conditions combine two or more conditions in a logical relationship (e.g., using AND, OR, and NOT). Students appropriately use control structures to perform repetitive and selection tasks. For example, when programming an interactive story, students could use a compound conditional within a loop to unlock a door only if a character has a key AND is touching the door. (CA CCSS for ELA/Literacy W.6.3, W.7.3, W.8.3) Alternatively, students could use compound conditionals when writing a program to test whether two points lie along the line defined by a particular linear function. (CA CCSS for Mathematics 8.EE.7) Additionally, students could use nested loops to program a character to do the "chicken dance" by opening and closing the beak, flapping the wings, shaking the hips, and clapping four times each; this dance "chorus" is then repeated several times in its entirety.
Standard Identifier: 6-8.DA.9
Grade Range:
6–8
Concept:
Data & Analysis
Subconcept:
Inference & Models
Practice(s):
Developing and Using Abstractions, Testing and Refining Computational Artifacts (4.4, 6.1)
Standard:
Test and analyze the effects of changing variables while using computational models.
Descriptive Statement:
Variables within a computational model may be changed, in order to alter a computer simulation or to more accurately represent how various data is related. Students interact with a given model, make changes to identified model variables, and observe and reflect upon the results. For example, students could test a program that makes a robot move on a track by making changes to variables (e.g., height and angle of track, size and mass of the robot) and discussing how these changes affect how far the robot travels. (CA NGSS: MS-PS2-2) Alternatively, students could test a game simulation and change variables (e.g., skill of simulated players, nature of opening moves) and analyze how these changes affect who wins the game. (CA NGSS: MS-ETS1-3) Additionally, students could modify a model for predicting the likely color of the next pick from a bag of colored candy and analyze the effects of changing variables representing the common color ratios in a typical bag of candy. (CA CCSS for Mathematics 7.SP.7, 8.SP.4)
Test and analyze the effects of changing variables while using computational models.
Descriptive Statement:
Variables within a computational model may be changed, in order to alter a computer simulation or to more accurately represent how various data is related. Students interact with a given model, make changes to identified model variables, and observe and reflect upon the results. For example, students could test a program that makes a robot move on a track by making changes to variables (e.g., height and angle of track, size and mass of the robot) and discussing how these changes affect how far the robot travels. (CA NGSS: MS-PS2-2) Alternatively, students could test a game simulation and change variables (e.g., skill of simulated players, nature of opening moves) and analyze how these changes affect who wins the game. (CA NGSS: MS-ETS1-3) Additionally, students could modify a model for predicting the likely color of the next pick from a bag of colored candy and analyze the effects of changing variables representing the common color ratios in a typical bag of candy. (CA CCSS for Mathematics 7.SP.7, 8.SP.4)
Standard Identifier: 6-8.IC.22
Grade Range:
6–8
Concept:
Impacts of Computing
Subconcept:
Social Interactions
Practice(s):
Collaborating Around Computing, Creating Computational Artifacts (2.4, 5.2)
Standard:
Collaborate with many contributors when creating a computational artifact.
Descriptive Statement:
Users have diverse sets of experiences, needs, and wants. These need to be understood and integrated into the design of computational artifacts. Students use applications that enable crowdsourcing to gather services, ideas, or content from a large group of people. At this level, crowdsourcing can be done at the local level (e.g., classroom, school, or neighborhood) and/or global level (e.g., age-appropriate online communities). For example, a group of students could use electronic surveys to solicit input from their neighborhood regarding an important social or political issue. They could collaborate with a community artist to combine animations and create a digital community collage informing the public about various points of view regarding the topic. (VAPA Visual Art 8.5.2, 8.5.4)
Collaborate with many contributors when creating a computational artifact.
Descriptive Statement:
Users have diverse sets of experiences, needs, and wants. These need to be understood and integrated into the design of computational artifacts. Students use applications that enable crowdsourcing to gather services, ideas, or content from a large group of people. At this level, crowdsourcing can be done at the local level (e.g., classroom, school, or neighborhood) and/or global level (e.g., age-appropriate online communities). For example, a group of students could use electronic surveys to solicit input from their neighborhood regarding an important social or political issue. They could collaborate with a community artist to combine animations and create a digital community collage informing the public about various points of view regarding the topic. (VAPA Visual Art 8.5.2, 8.5.4)
Standard Identifier: 9-12.AP.14
Grade Range:
9–12
Concept:
Algorithms & Programming
Subconcept:
Control
Practice(s):
Creating Computational Artifacts (5.2)
Standard:
Justify the selection of specific control structures by identifying tradeoffs associated with implementation, readability, and performance.
Descriptive Statement:
The selection of control structures in a given programming language impacts readability and performance. Readability refers to how clear the program is to other programmers and can be improved through documentation. Control structures at this level may include, for example, conditional statements, loops, event handlers, and recursion. Students justify control structure selection and tradeoffs in the process of creating their own computational artifacts. The discussion of performance is limited to a theoretical understanding of execution time and storage requirements; a quantitative analysis is not expected. For example, students could compare the readability and program performance of iterative and recursive implementations of procedures that calculate the Fibonacci sequence. Alternatively, students could compare the readability and performance tradeoffs of multiple if statements versus a nested if statement.
Justify the selection of specific control structures by identifying tradeoffs associated with implementation, readability, and performance.
Descriptive Statement:
The selection of control structures in a given programming language impacts readability and performance. Readability refers to how clear the program is to other programmers and can be improved through documentation. Control structures at this level may include, for example, conditional statements, loops, event handlers, and recursion. Students justify control structure selection and tradeoffs in the process of creating their own computational artifacts. The discussion of performance is limited to a theoretical understanding of execution time and storage requirements; a quantitative analysis is not expected. For example, students could compare the readability and program performance of iterative and recursive implementations of procedures that calculate the Fibonacci sequence. Alternatively, students could compare the readability and performance tradeoffs of multiple if statements versus a nested if statement.
Showing 1 - 10 of 15 Standards
Questions: Curriculum Frameworks and Instructional Resources Division |
CFIRD@cde.ca.gov | 916-319-0881