Mathematics Standards
Remove this criterion from the search
Circles
Remove this criterion from the search
Geometric Measurement and Dimension
Remove this criterion from the search
Interpreting Categorical and Quantitative Data
Remove this criterion from the search
Modeling with Geometry
Remove this criterion from the search
The Number System
Results
Showing 61 - 70 of 83 Standards
Standard Identifier: G-GMD.5
Grade Range:
8–12
Domain:
Geometric Measurement and Dimension
Discipline:
Math II
Conceptual Category:
Geometry
Cluster:
Visualize relationships between two-dimensional and three-dimensional objects.
Standard:
Know that the effect of a scale factor k greater than zero on length, area, and volume is to multiply each by k, k^2, and k^3, respectively; determine length, area and volume measures using scale factors. CA
Visualize relationships between two-dimensional and three-dimensional objects.
Standard:
Know that the effect of a scale factor k greater than zero on length, area, and volume is to multiply each by k, k^2, and k^3, respectively; determine length, area and volume measures using scale factors. CA
Standard Identifier: G-GMD.6
Grade Range:
8–12
Domain:
Geometric Measurement and Dimension
Discipline:
Math II
Conceptual Category:
Geometry
Cluster:
Visualize relationships between two-dimensional and three-dimensional objects.
Standard:
Verify experimentally that in a triangle, angles opposite longer sides are larger, sides opposite larger angles are longer, and the sum of any two side lengths is greater than the remaining side length; apply these relationships to solve realworld and mathematical problems. CA
Visualize relationships between two-dimensional and three-dimensional objects.
Standard:
Verify experimentally that in a triangle, angles opposite longer sides are larger, sides opposite larger angles are longer, and the sum of any two side lengths is greater than the remaining side length; apply these relationships to solve realworld and mathematical problems. CA
Standard Identifier: G-GMD.6
Grade Range:
8–12
Domain:
Geometric Measurement and Dimension
Discipline:
Geometry
Conceptual Category:
Geometry
Cluster:
Visualize relationships between two-dimensional and three-dimensional objects.
Standard:
Verify experimentally that in a triangle, angles opposite longer sides are larger, sides opposite larger angles are longer, and the sum of any two side lengths is greater than the remaining side length; apply these relationships to solve realworld and mathematical problems. CA
Visualize relationships between two-dimensional and three-dimensional objects.
Standard:
Verify experimentally that in a triangle, angles opposite longer sides are larger, sides opposite larger angles are longer, and the sum of any two side lengths is greater than the remaining side length; apply these relationships to solve realworld and mathematical problems. CA
Standard Identifier: G-MG.1
Grade Range:
8–12
Domain:
Modeling with Geometry
Discipline:
Geometry
Conceptual Category:
Geometry
Cluster:
Apply geometric concepts in modeling situations.
Standard:
Use geometric shapes, their measures, and their properties to describe objects (e.g., modeling a tree trunk or a human torso as a cylinder). *
Apply geometric concepts in modeling situations.
Standard:
Use geometric shapes, their measures, and their properties to describe objects (e.g., modeling a tree trunk or a human torso as a cylinder). *
Standard Identifier: G-MG.2
Grade Range:
8–12
Domain:
Modeling with Geometry
Discipline:
Geometry
Conceptual Category:
Geometry
Cluster:
Apply geometric concepts in modeling situations.
Standard:
Apply concepts of density based on area and volume in modeling situations (e.g., persons per square mile, BTUs per cubic foot). *
Apply geometric concepts in modeling situations.
Standard:
Apply concepts of density based on area and volume in modeling situations (e.g., persons per square mile, BTUs per cubic foot). *
Standard Identifier: G-MG.3
Grade Range:
8–12
Domain:
Modeling with Geometry
Discipline:
Geometry
Conceptual Category:
Geometry
Cluster:
Apply geometric concepts in modeling situations.
Standard:
Apply geometric methods to solve design problems (e.g., designing an object or structure to satisfy physical constraints or minimize cost; working with typographic grid systems based on ratios). *
Apply geometric concepts in modeling situations.
Standard:
Apply geometric methods to solve design problems (e.g., designing an object or structure to satisfy physical constraints or minimize cost; working with typographic grid systems based on ratios). *
Standard Identifier: G-GMD.4
Grade Range:
9–12
Domain:
Geometric Measurement and Dimension
Discipline:
Math III
Conceptual Category:
Geometry
Cluster:
Visualize relationships between two-dimensional and three-dimensional objects.
Standard:
Identify the shapes of two-dimensional cross-sections of three-dimensional objects, and identify three-dimensional objects generated by rotations of two-dimensional objects.
Visualize relationships between two-dimensional and three-dimensional objects.
Standard:
Identify the shapes of two-dimensional cross-sections of three-dimensional objects, and identify three-dimensional objects generated by rotations of two-dimensional objects.
Standard Identifier: G-MG.1
Grade Range:
9–12
Domain:
Modeling with Geometry
Discipline:
Math III
Conceptual Category:
Geometry
Cluster:
Apply geometric concepts in modeling situations.
Standard:
Use geometric shapes, their measures, and their properties to describe objects (e.g., modeling a tree trunk or a human torso as a cylinder). *
Apply geometric concepts in modeling situations.
Standard:
Use geometric shapes, their measures, and their properties to describe objects (e.g., modeling a tree trunk or a human torso as a cylinder). *
Standard Identifier: G-MG.2
Grade Range:
9–12
Domain:
Modeling with Geometry
Discipline:
Math III
Conceptual Category:
Geometry
Cluster:
Apply geometric concepts in modeling situations.
Standard:
Apply concepts of density based on area and volume in modeling situations (e.g., persons per square mile, BTUs per cubic foot). *
Apply geometric concepts in modeling situations.
Standard:
Apply concepts of density based on area and volume in modeling situations (e.g., persons per square mile, BTUs per cubic foot). *
Standard Identifier: G-MG.3
Grade Range:
9–12
Domain:
Modeling with Geometry
Discipline:
Math III
Conceptual Category:
Geometry
Cluster:
Apply geometric concepts in modeling situations.
Standard:
Apply geometric methods to solve design problems (e.g., designing an object or structure to satisfy physical constraints or minimize cost; working with typographic grid systems based on ratios). *
Apply geometric concepts in modeling situations.
Standard:
Apply geometric methods to solve design problems (e.g., designing an object or structure to satisfy physical constraints or minimize cost; working with typographic grid systems based on ratios). *
Showing 61 - 70 of 83 Standards
Questions: Curriculum Frameworks and Instructional Resources Division |
CFIRD@cde.ca.gov | 916-319-0881