Computer Science Standards
Results
Showing 1 - 10 of 41 Standards
Standard Identifier: K-2.AP.10
Grade Range:
K–2
Concept:
Algorithms & Programming
Subconcept:
Algorithms
Practice(s):
Recognizing and Defining Computational Problems, Developing and Using Abstractions (3.2, 4.4)
Standard:
Model daily processes by creating and following algorithms to complete tasks.
Descriptive Statement:
Algorithms are sequences of instructions that describe how to complete a specific task. Students create algorithms that reflect simple life tasks inside and outside of the classroom. For example, students could create algorithms to represent daily routines for getting ready for school, transitioning through center rotations, eating lunch, and putting away art materials. Students could then write a narrative sequence of events. (CA CCSS for ELA/Literacy W.K.3, W.1.3, W.2.3) Alternatively, students could create a game or a dance with a specific set of movements to reach an intentional goal or objective. (P.E K.2, 1.2, 2.2) Additionally, students could create a map of their neighborhood and give step-by-step directions of how they get to school. (HSS.K.4, 1.2, 2.2)
Model daily processes by creating and following algorithms to complete tasks.
Descriptive Statement:
Algorithms are sequences of instructions that describe how to complete a specific task. Students create algorithms that reflect simple life tasks inside and outside of the classroom. For example, students could create algorithms to represent daily routines for getting ready for school, transitioning through center rotations, eating lunch, and putting away art materials. Students could then write a narrative sequence of events. (CA CCSS for ELA/Literacy W.K.3, W.1.3, W.2.3) Alternatively, students could create a game or a dance with a specific set of movements to reach an intentional goal or objective. (P.E K.2, 1.2, 2.2) Additionally, students could create a map of their neighborhood and give step-by-step directions of how they get to school. (HSS.K.4, 1.2, 2.2)
Standard Identifier: K-2.AP.12
Grade Range:
K–2
Concept:
Algorithms & Programming
Subconcept:
Control
Practice(s):
Creating Computational Artifacts (5.2)
Standard:
Create programs with sequences of commands and simple loops, to express ideas or address a problem.
Descriptive Statement:
People create programs by composing sequences of commands that specify the precise order in which instructions should be executed. Loops enable programs to repeat a sequence of commands multiple times. For example, students could follow simple movements in response to oral instructions. Students could then create a simple sequence of movement commands in response to a given problem (e.g., In how many ways can you travel from point A to point B?) and represent it as a computer program, using loops to repeat commands. (VAPA Dance K.1.4, 1.2.3, 1.2.5, 1.2.8, 2.2.1, 2.2.2, 2.2.3) Alternatively, on a mat with many different CVC words, students could program robots to move to words with a similar vowel sound. Students could look for multiple ways to solve the problem and simplify their solution by incorporating loops. (CA CCSS for ELA/Literacy RF.K.2.D, RF.1.2.C)
Create programs with sequences of commands and simple loops, to express ideas or address a problem.
Descriptive Statement:
People create programs by composing sequences of commands that specify the precise order in which instructions should be executed. Loops enable programs to repeat a sequence of commands multiple times. For example, students could follow simple movements in response to oral instructions. Students could then create a simple sequence of movement commands in response to a given problem (e.g., In how many ways can you travel from point A to point B?) and represent it as a computer program, using loops to repeat commands. (VAPA Dance K.1.4, 1.2.3, 1.2.5, 1.2.8, 2.2.1, 2.2.2, 2.2.3) Alternatively, on a mat with many different CVC words, students could program robots to move to words with a similar vowel sound. Students could look for multiple ways to solve the problem and simplify their solution by incorporating loops. (CA CCSS for ELA/Literacy RF.K.2.D, RF.1.2.C)
Standard Identifier: K-2.AP.14
Grade Range:
K–2
Concept:
Algorithms & Programming
Subconcept:
Program Development
Practice(s):
Creating Computational Artifacts, Communicating About Computing (5.1, 7.2)
Standard:
Develop plans that describe a program’s sequence of events, goals, and expected outcomes.
Descriptive Statement:
Creating a plan for what a program will do clarifies the steps that will be needed to create the program and can be used to check if a program runs as expected. Students create a planning document to illustrate their program's sequence of events, goals, and expected outcomes of what their program will do. Planning documents could include a story map, a storyboard, or a sequential graphic organizer, to illustrate their program's sequence of events, goals, and expected outcomes of what their program will do. Students at this level may complete the planning process with help from the teacher. For example, students could create a storyboard or timeline that represents a family's history, leading to their current location of residence. Students could then create a plan for a program that animates the story of family locations. (HSS 2.1.1) (CA CCSS for ELA/Literacy W.K.3, W.1.3, W.2.3)
Develop plans that describe a program’s sequence of events, goals, and expected outcomes.
Descriptive Statement:
Creating a plan for what a program will do clarifies the steps that will be needed to create the program and can be used to check if a program runs as expected. Students create a planning document to illustrate their program's sequence of events, goals, and expected outcomes of what their program will do. Planning documents could include a story map, a storyboard, or a sequential graphic organizer, to illustrate their program's sequence of events, goals, and expected outcomes of what their program will do. Students at this level may complete the planning process with help from the teacher. For example, students could create a storyboard or timeline that represents a family's history, leading to their current location of residence. Students could then create a plan for a program that animates the story of family locations. (HSS 2.1.1) (CA CCSS for ELA/Literacy W.K.3, W.1.3, W.2.3)
Standard Identifier: K-2.AP.15
Grade Range:
K–2
Concept:
Algorithms & Programming
Subconcept:
Program Development
Practice(s):
Communicating About Computing (7.3)
Standard:
Give attribution when using the ideas and creations of others while developing programs.
Descriptive Statement:
Computing makes it easy to reuse and remix others' creations, and this comes with a level of responsibility. Students credit artifacts that were created by others, such as pictures, music, and code. Credit could be given orally if presenting their work to the class, or in writing if sharing work on a class blog or website. Proper attribution at this stage does not require formal citation, such as in a bibliography or works cited document. For example, when creating an animation of the sun, moon, and stars using a blocks-based language, students could draw their own sun and use an image of the moon and stars from a website or a teammate. When students present the model to the class, they can orally give credit to the website or peer for the contributions. (CA CCSS for ELA/Literacy SL.K.5, SL.1.5, SL.2.5) (NGSS.1-ESS1-1) (CA Model School Library Standards 2.3.b, 2.4.2.a)
Give attribution when using the ideas and creations of others while developing programs.
Descriptive Statement:
Computing makes it easy to reuse and remix others' creations, and this comes with a level of responsibility. Students credit artifacts that were created by others, such as pictures, music, and code. Credit could be given orally if presenting their work to the class, or in writing if sharing work on a class blog or website. Proper attribution at this stage does not require formal citation, such as in a bibliography or works cited document. For example, when creating an animation of the sun, moon, and stars using a blocks-based language, students could draw their own sun and use an image of the moon and stars from a website or a teammate. When students present the model to the class, they can orally give credit to the website or peer for the contributions. (CA CCSS for ELA/Literacy SL.K.5, SL.1.5, SL.2.5) (NGSS.1-ESS1-1) (CA Model School Library Standards 2.3.b, 2.4.2.a)
Standard Identifier: K-2.AP.16
Grade Range:
K–2
Concept:
Algorithms & Programming
Subconcept:
Program Development
Practice(s):
Testing and Refining Computational Artifacts (6.2)
Standard:
Debug errors in an algorithm or program that includes sequences and simple loops.
Descriptive Statement:
Algorithms or programs may not always work correctly. Students use various strategies, such as changing the sequence of the steps, following the algorithm in a step-by-step manner, or trial and error to fix problems in algorithms and programs. For example, when given images placed in a random order, students could give step-by-step commands to direct a robot, or a student playing a robot, to navigate to the images in the correct sequence. Examples of images include storyboard cards from a familiar story (CA CCSS for ELA/Literacy RL.K.2, RL.1.2, RL.2.2) and locations of the sun at different times of the day (CA NGSS: 1-ESS1-1). Alternatively, students could "program" the teacher or another classmate by giving precise instructions to make a peanut butter and jelly sandwich or navigate around the classroom. When the teacher or classmate doesn't respond as intended, students correct their commands. Additionally, students could receive a partially completed soundboard program that has a variety of animals programmed to play a corresponding sound when the user touches them. Students correct any sounds that don't match the animal (e.g., if the cat moos, students change the moo sound to meow).
Debug errors in an algorithm or program that includes sequences and simple loops.
Descriptive Statement:
Algorithms or programs may not always work correctly. Students use various strategies, such as changing the sequence of the steps, following the algorithm in a step-by-step manner, or trial and error to fix problems in algorithms and programs. For example, when given images placed in a random order, students could give step-by-step commands to direct a robot, or a student playing a robot, to navigate to the images in the correct sequence. Examples of images include storyboard cards from a familiar story (CA CCSS for ELA/Literacy RL.K.2, RL.1.2, RL.2.2) and locations of the sun at different times of the day (CA NGSS: 1-ESS1-1). Alternatively, students could "program" the teacher or another classmate by giving precise instructions to make a peanut butter and jelly sandwich or navigate around the classroom. When the teacher or classmate doesn't respond as intended, students correct their commands. Additionally, students could receive a partially completed soundboard program that has a variety of animals programmed to play a corresponding sound when the user touches them. Students correct any sounds that don't match the animal (e.g., if the cat moos, students change the moo sound to meow).
Standard Identifier: K-2.AP.17
Grade Range:
K–2
Concept:
Algorithms & Programming
Subconcept:
Program Development
Practice(s):
Communicating About Computing (7.2)
Standard:
Describe the steps taken and choices made during the iterative process of program development.
Descriptive Statement:
Program developers make choices and iterate to continually refine their product. At this stage, students explain or write about the goals and expected outcomes of the programs they create and the choices that they made when creating programs. Students could use coding journals, discussions with a teacher, class presentations, or blogs. For example, students could use a combination of images, verbal reflections, a physical model, and/or written text to show the step-by-step process taken to develop a program such as cutting and pasting coding commands into a journal, using manipulatives that represent different commands and control structures, and taking screenshots of code and adding to a digital journal. This iterative process could be documented via a speech, journal, one on one conference with teacher or peer, small group conference, or blog. (CA CCSS for ELA/Literacy SL.K.5, SL.1.5, SL.2.5) (CA NGSS: K-2-ETS1.2)
Describe the steps taken and choices made during the iterative process of program development.
Descriptive Statement:
Program developers make choices and iterate to continually refine their product. At this stage, students explain or write about the goals and expected outcomes of the programs they create and the choices that they made when creating programs. Students could use coding journals, discussions with a teacher, class presentations, or blogs. For example, students could use a combination of images, verbal reflections, a physical model, and/or written text to show the step-by-step process taken to develop a program such as cutting and pasting coding commands into a journal, using manipulatives that represent different commands and control structures, and taking screenshots of code and adding to a digital journal. This iterative process could be documented via a speech, journal, one on one conference with teacher or peer, small group conference, or blog. (CA CCSS for ELA/Literacy SL.K.5, SL.1.5, SL.2.5) (CA NGSS: K-2-ETS1.2)
Standard Identifier: 3-5.AP.10
Grade Range:
3–5
Concept:
Algorithms & Programming
Subconcept:
Algorithms
Practice(s):
Recognizing and Defining Computational Problems, Testing and Refining Computational Artifacts (3.3, 6.3)
Standard:
Compare and refine multiple algorithms for the same task and determine which is the most appropriate.
Descriptive Statement:
Different algorithms can achieve the same result, though sometimes one algorithm might be more appropriate for a specific solution. Students examine different ways to solve the same task and decide which would be the better solution for the specific scenario. For example, students could use a map and create multiple algorithms to model the early land and sea routes to and from European settlements in California. They could then compare and refine their algorithms to reflect faster travel times, shorter distances, or avoid specific characteristics, such as mountains, deserts, ocean currents, and wind patterns. (HSS.4.2.2) Alternatively, students could identify multiple algorithms for decomposing a fraction into a sum of fractions with the same denominator and record each decomposition with an equation (e.g., 2 1/8 = 1 + 1 + 1/8 = 8/8 + 8/8 + 1/8). Students could then select the most efficient algorithm (e.g., fewest number of steps). (CA CCSS for Mathematics 4.NF.3b) Additionally, students could compare algorithms that describe how to get ready for school and modify them for supporting different goals including having time to care for a pet, being able to talk with a friend before classes start, or taking a longer route to school to accompany a younger sibling to their school first. Students could then write an opinion piece, justifying with reasons their selected algorithm is most appropriate. (CA CCSS for ELA/Literacy W.3.1, W.4.1, W.5.1)
Compare and refine multiple algorithms for the same task and determine which is the most appropriate.
Descriptive Statement:
Different algorithms can achieve the same result, though sometimes one algorithm might be more appropriate for a specific solution. Students examine different ways to solve the same task and decide which would be the better solution for the specific scenario. For example, students could use a map and create multiple algorithms to model the early land and sea routes to and from European settlements in California. They could then compare and refine their algorithms to reflect faster travel times, shorter distances, or avoid specific characteristics, such as mountains, deserts, ocean currents, and wind patterns. (HSS.4.2.2) Alternatively, students could identify multiple algorithms for decomposing a fraction into a sum of fractions with the same denominator and record each decomposition with an equation (e.g., 2 1/8 = 1 + 1 + 1/8 = 8/8 + 8/8 + 1/8). Students could then select the most efficient algorithm (e.g., fewest number of steps). (CA CCSS for Mathematics 4.NF.3b) Additionally, students could compare algorithms that describe how to get ready for school and modify them for supporting different goals including having time to care for a pet, being able to talk with a friend before classes start, or taking a longer route to school to accompany a younger sibling to their school first. Students could then write an opinion piece, justifying with reasons their selected algorithm is most appropriate. (CA CCSS for ELA/Literacy W.3.1, W.4.1, W.5.1)
Standard Identifier: 3-5.AP.12
Grade Range:
3–5
Concept:
Algorithms & Programming
Subconcept:
Control
Practice(s):
Creating Computational Artifacts (5.2)
Standard:
Create programs that include events, loops, and conditionals.
Descriptive Statement:
Control structures specify the order (sequence) in which instructions are executed within a program and can be combined to support the creation of more complex programs. Events allow portions of a program to run based on a specific action. Conditionals allow for the execution of a portion of code in a program when a certain condition is true. Loops allow for the repetition of a sequence of code multiple times. For example, students could program an interactive map of the United States of America. They could use events to initiate a question when the user clicks on a state and conditionals to check whether the user input is correct. They could use loops to repeat the question until the user answers correctly or to control the length of a "congratulations" scenario that plays after a correct answer. (HSS.5.9) Alternatively, students could write a math fluency game that asks products of two one-digit numbers and then uses a conditional to check whether or not the answer that was entered is correct. They could use a loop to repeatedly ask another question. They could use events to allow the user to click on a green button to play again or a red button to end the game. (CA CCSS for Mathematics 3.OA.7) Additionally, students could create a program as a role-playing game based on a literary work. Loops could be used to animate a character's movement. When reaching a decision point in the story, an event could initiate the user to type a response. A conditional could change the setting or have the story play out differently based on the user input. (CA CCSS for ELA/Literacy RL.5.3)
Create programs that include events, loops, and conditionals.
Descriptive Statement:
Control structures specify the order (sequence) in which instructions are executed within a program and can be combined to support the creation of more complex programs. Events allow portions of a program to run based on a specific action. Conditionals allow for the execution of a portion of code in a program when a certain condition is true. Loops allow for the repetition of a sequence of code multiple times. For example, students could program an interactive map of the United States of America. They could use events to initiate a question when the user clicks on a state and conditionals to check whether the user input is correct. They could use loops to repeat the question until the user answers correctly or to control the length of a "congratulations" scenario that plays after a correct answer. (HSS.5.9) Alternatively, students could write a math fluency game that asks products of two one-digit numbers and then uses a conditional to check whether or not the answer that was entered is correct. They could use a loop to repeatedly ask another question. They could use events to allow the user to click on a green button to play again or a red button to end the game. (CA CCSS for Mathematics 3.OA.7) Additionally, students could create a program as a role-playing game based on a literary work. Loops could be used to animate a character's movement. When reaching a decision point in the story, an event could initiate the user to type a response. A conditional could change the setting or have the story play out differently based on the user input. (CA CCSS for ELA/Literacy RL.5.3)
Standard Identifier: 3-5.AP.15
Grade Range:
3–5
Concept:
Algorithms & Programming
Subconcept:
Program Development
Practice(s):
Fostering an Inclusive Computing Culture, Creating Computational Artifacts (1.1, 5.1)
Standard:
Use an iterative process to plan and develop a program by considering the perspectives and preferences of others.
Descriptive Statement:
Planning is an important part of the iterative process of program development. Students gain a basic understanding of the importance and process of planning before beginning to write code for a program. They plan the development of a program by outlining key features, time and resource constraints, and user expectations. Students should document the plan as, for example, a storyboard, flowchart, pseudocode, or story map. For example, students could collaborate with a partner to plan and develop a program that graphs a function. They could iteratively modify the program based on feedback from diverse users, such as students who are color blind and may have trouble differentiating lines on a graph based on the color. (CA CCSS for Mathematics 5.G.1, 5.G.2) Alternatively, students could plan as a team to develop a program to display experimental data. They could implement the program in stages, generating basic displays first and then soliciting feedback from others on how easy it is to interpret (e.g., are labels clear and readable?, are lines thick enough?, are titles understandable?). Students could iteratively improve their display to make it more readable and to better support the communication of the finding of the experiment. (NGSS.3-5-ETS1-1, 3-5-ETS1-2, 3-5-ETS1-3)
Use an iterative process to plan and develop a program by considering the perspectives and preferences of others.
Descriptive Statement:
Planning is an important part of the iterative process of program development. Students gain a basic understanding of the importance and process of planning before beginning to write code for a program. They plan the development of a program by outlining key features, time and resource constraints, and user expectations. Students should document the plan as, for example, a storyboard, flowchart, pseudocode, or story map. For example, students could collaborate with a partner to plan and develop a program that graphs a function. They could iteratively modify the program based on feedback from diverse users, such as students who are color blind and may have trouble differentiating lines on a graph based on the color. (CA CCSS for Mathematics 5.G.1, 5.G.2) Alternatively, students could plan as a team to develop a program to display experimental data. They could implement the program in stages, generating basic displays first and then soliciting feedback from others on how easy it is to interpret (e.g., are labels clear and readable?, are lines thick enough?, are titles understandable?). Students could iteratively improve their display to make it more readable and to better support the communication of the finding of the experiment. (NGSS.3-5-ETS1-1, 3-5-ETS1-2, 3-5-ETS1-3)
Standard Identifier: 3-5.AP.16
Grade Range:
3–5
Concept:
Algorithms & Programming
Subconcept:
Program Development
Practice(s):
Creating Computational Artifacts, Communicating About Computing (5.2, 7.3)
Standard:
Observe intellectual property rights and give appropriate attribution when creating, remixing, or combining programs.
Descriptive Statement:
Intellectual property rights can vary by country, but copyright laws give the creator of a work a set of rights and prevents others from copying the work and using it in ways that they may not like. Students consider common licenses that place limitations or restrictions on the use of others' work, such as images and music downloaded from the Internet. When incorporating the work of others, students attribute the work. At this level, students could give attribution by including credits or links directly in their programs, code comments, or separate project pages. For example, when making a program to model the life cycle of a butterfly, students could modify and reuse an existing program that describes the life cycle of a frog. Based on their research, students could identify and use Creative Commons-licensed or public domain images and sounds of caterpillars and butterflies. Students give attribution by properly citing the source of the original piece as necessary. (CA NGSS: 3-LS-1-1) (CA CCSS for ELA/Literacy W.3.8, W.4.8, W.5.8) Alternatively, when creating a program explaining the structure of the United States goverment, students find Creative Commons-licensed or public domain images to represent the three branches of government and attribute ownership of the images appropriately. If students find and incorporate an audio file of a group playing part of the national anthem, they appropriately give attribution on the project page. (HSS.3.4.4)
Observe intellectual property rights and give appropriate attribution when creating, remixing, or combining programs.
Descriptive Statement:
Intellectual property rights can vary by country, but copyright laws give the creator of a work a set of rights and prevents others from copying the work and using it in ways that they may not like. Students consider common licenses that place limitations or restrictions on the use of others' work, such as images and music downloaded from the Internet. When incorporating the work of others, students attribute the work. At this level, students could give attribution by including credits or links directly in their programs, code comments, or separate project pages. For example, when making a program to model the life cycle of a butterfly, students could modify and reuse an existing program that describes the life cycle of a frog. Based on their research, students could identify and use Creative Commons-licensed or public domain images and sounds of caterpillars and butterflies. Students give attribution by properly citing the source of the original piece as necessary. (CA NGSS: 3-LS-1-1) (CA CCSS for ELA/Literacy W.3.8, W.4.8, W.5.8) Alternatively, when creating a program explaining the structure of the United States goverment, students find Creative Commons-licensed or public domain images to represent the three branches of government and attribute ownership of the images appropriately. If students find and incorporate an audio file of a group playing part of the national anthem, they appropriately give attribution on the project page. (HSS.3.4.4)
Showing 1 - 10 of 41 Standards
Questions: Curriculum Frameworks and Instructional Resources Division |
CFIRD@cde.ca.gov | 916-319-0881